 |
 |
|
|
|
| Aqualease 75 |
 |
Aqualease 75 is an improved concentrated emulsion of silicone polymers derived from Aqualease 6102 featuring corrosion protection and improved film formation. This formula is designed to release synthetic and natural rubber, microcellular and solid polyurethane elastomers, epoxies, and thermoplastic resins.
A thin film of Aqualease 75 provides excellent release, requires little or no mold maintenance, and provides better protection against rust on steel molds. This product is an excellent low cost replacement for organic solvent release agents.
* Features:
-Water based carrier
-Excellent release
-Excellent film formation
-No build-up
-Low toxicity and odor
-No volatile organic solvents
-Reduced health risks
-Low mold maintenance
* Application:
1. Dilute 1 part Aqualease 75 with 4 parts water, and preheat molds to operating temperature.
2. Spray using an air assisted gun. Always apply a light coating before each molding cycle. Excess water will create surface defects on the molded parts.
3. Should mold build-up occur, dilute Aqualease 75 blend as above in instruction 1 with an additional part of water.
4. Aqualease 75 is a stable water emulsion of silicone polymers, but repeated or prolonged freezing may cause separation. Should this occur, mix well before using. This product will
freeze at 32'F. |
 |
Appearance: Milky Fluid
Application: Spray
Solids: 18-20%
Viscosity: Low
Mold Temperature: All
Mold Types: All |
|
|
|
|
|
