 |
 |
|
|
|
| Sulfads Rodform |
 |
| Dipentamethylene thiuram hexasulfide |
 |
| 971-15-3 |
 |
Sulfur bearing ultra accelerator and sulfur donor for NR and SR’s. Used for compounding heat
resistant NR and SBR, as an accelerator for Hypalon vulcanization and in curing systems for IIR
and EPDM. |
 |
Composition: Dipentamethylene thiuram hexasulfide
Physical State: Light yellow to buff rods
* Specification
- Ash Content 0.5% maximum
- Heat Loss at 80-85°C 1.0% maximum
- Melting Point, Initial 115°C minimum
* GENERAL INFORMATION : Typical values not routinely measured or reported on the Certificate of Analysis.
- Density at 25°C 1.48 Mg/m3
- Solubility : Soluble in acetone, chloroform and toluene. Insoluble in water. |
|
|
|
|
|
