 |
 |
|
|
|
| Thiate H |
 |
| 1,3-Dibutyl-2-thiourea |
 |
| 1,3-Dibutylthiourea |
 |
| 105-55-5 |
 |
For CR, EPDM and chlorobutyl. For fast initial set up, continuous cured sponge, LCM extrusions
and hot air cures. Suggested usage 0.5 to 1.0% on polymer. In CR systems, this accelerator is
noted for its ability to import very low compression set valves. |
 |
Composition: 1,3-diethylthiourea
Physical State: White solid
* Specification
- Ash Content at 900'C 0.30% maximum
- Heat Loss at 60'C 0.30% maximum
- Melting Point, DSC 76.0-80.0'C
* GENERAL INFORMATION : Typical values not routinely measured or reported on the Certificate of Analysis.
- Density at 25'C : 1.10 Mg/m3
- Solubility : Soluble in acetone, chloroform and methanol. Practically insoluble in petroleum ether or water. |
|
|
|
|
|
