 |
 |
|
|
|
| EXXONMOBIL PP7035 E3 |
 |
| High Flow Copolymer |
 |
| General purpose high flow impact copolymer for injection molding. |
 |
Melt Flow Rate (230'C/2.16 kg): 35 g/10 min
Density: 0.90 g/cm 3
Tensile Strength @ Yield (2 in/min, 50 mm/min): 3.4 kpsi 23 MPa
Elongation @ Yield (2 in/min, 50 mm/min): 14 %
Flexural Modulus, 1% Secant (0.05 in/min, 1.3 mm/min): 139 kpsi 959 MPa
Izod Impact Strength Notched, @ 23'C (73'F): 2.5 ft-lb/in 133 J/m
Gardner Impact Strength 0.125 in. (3.2 mm) thick disk @ - 29'C (-20'F): 217 in-lb 25 J
Heat Deflection Temperature @ 66 psi, 455 kPa: 180'F 82'C
Typical Processing Temperature: 400-450'F 204-232'C |
|
|
|
|
|
