|
|
|
|
|
Emralon GP 1904 |
|
Use an external-atomizing spray gun with 35-50 psi air pressure and adjust the gun to give a well-atomized spray. For optimum performance, the final coating thickness should be 0.0003-0.0010 inches (0.008 to 0.025 millimeters). When properly applied, the coating will be even and free of runs, blisters, or "fish eyes." Some electrostatic spray systems may be used to apply Emralon GP 1904. Call Acheson's Technical Finishes Department for details, (800) 255-1908. Emralon GP 1904 can also be applied by dipping. The product should be diluted 3:2 (product:solvent) by weight with MEK. The average dip coating will produce a heavier coat, but a precure of ten minutes at 250' to 275'F (121' to 135'C) or one minute at 350'F (177'C) is required between dips. Dip-spin will require two or three coats. A partial cure of one minute at 350'F (177'C) is required between coats. |
|
|
|
|
|
|
|
ÀÌÁ¦Ç°¿¡ ´ëÇØ µî·ÏµÈ ÆǸž÷ü°¡ ¾ø½À´Ï´Ù. |
|
|
|
|
|