 |
 |
|
|
|
| Canyon tone Stain |
 |
Pigmented Water-repellent Stain
CANYON TONE STAIN is a pure acrylic, water-repellent penetrating stain. This unique penetrating stain contains methyl methacrylateethyl acrylate copolymer resins and inorganic oxide toning pigments for long term color stability, ultraviolet resistance, alkali and pollution resistance and water-repellency. Toning pigments are chemically suspended in the acrylic resins at all times, thus eliminating settling and color variations on the structure. CANYON TONE STAIN is integrally locked into the substrate as a result of its low viscosity and microscopic penetration properties. It will allow moisture vapor to escape from the building interior under a vapor pressure drive while, at the same time, provides excellent water-repellency on the exterior through the use of hydrophobic resins.
CANYON TONE STAIN was specifically developed as a penetrating stain with waterrepellent properties for use on properly prepared vertical, above-grade smooth or textured concrete, exposed aggregate concrete, glass fiber reinforced concrete, brick, stone, stucco and other masonry surfaces. It is not designed for application to horizontal surfaces. CANYON TONE STAIN corrects natural color imperfections in the substrate by imparting permanent color uniformity plus waterrepellency without disturbing the natural texture of the structure. It will also protect the substrate against atmospheric deterioration. CANYON TONE STAIN is not designed to waterproof concrete block or other porous substrates under wind driven rain or other severe conditions. |
 |
Solids by Weight : 32% (±2)
Solids by Volume : 21% (±2)
Weight per Gallon : 8.3 lbs. (±.2 lbs) (.98 kg/l)
Permeance : 5.6 Perms (.154 metric perms)
Dry Time : 10 minutes
Cure Time: 30 minutes
Gloss : 3.5 (60'Gardner)
Low & High Temp.Service Limits : -70'F to 200'F (-56'C to 94'C) |
|
|
|
|
|
