 |
 |
|
|
|
| Uniflex Sealer 100 |
 |
UNIFLEX SEALER 100 is a two component epoxy polyamide penetrating sealer. This unique sealer is specially formulated to penetrate and seal concrete and wood substrates. UNIFLEX SEALER 100 welds loose and weak concrete surfaces into a monolithic, water-shedding substrate.
UNIFLEX SEALER 100 is used to seal concrete or wood substrates and to improved adhesion when applying United’s Uniflex traffic deck coatings. UNIFLEX SEALER 100 is a superior finish for concrete substrates where chemical and abrasion resistance as well as cleanability are required.
UNIFLEX SEALER 100 by itself is recommended for interior areas which are not subject to direct ultraviolet exposure. If used on exterior surfaces without an approved topcoat, UNIFLEX SEALER 100 will amber or darken on aging. UNIFLEX SEALER 100 is manufactured in standard clear. |
 |
Mixing Ratio: 1 to 1 by volume (1A:1B)
Mixed Usable Pot Life: 48 hours @ 75'F (24'C), 50% R.H.
Solids by Weight (Mixed): 18% (±.5)
Solids by Volume (Mixed): 15% (±.5)
Viscosity (Mixed):50 to 60 KU (Krebs Units)
Dry Time to Touch: 30 minutes at 75°F (24°C), 50% R.H.
Dure Time: 3 hours at 75'F (24'C), 50% R.H.
Low & High Temperature Limits:-70'F to `50'F (-56'C to 66'C) |
|
|
|
|
|
