 |
 |
|
|
|
| Elastosil M 4400 |
 |
RTV-2 Siliconkautschuk/ RTV-2 Silicone Rubber
Due to its good flow characteristics and its low modulus, ELASTOSIL M4400is particularly suitableas a mould-making material for reproducing intricate structures, even if minor undercuts are involved. The good resistance to casting resins, especially polyester resins, enables large numbers of castings to be taken from one mould. Other materials, such as plaster or wax, may also be cast without any problems from moulds made of ELASTOSIL M4400. Due to the low hardness of the cured rubber and its excellent ink transfer performance, ELASTOSIL M4400 is also highly suitable as a starting material for the production of printing pads. |
 |
Colour : pale yellow
Density at 23'C : 1.31
Viscosity at 23'C,after stirring : 30,000 |
|
|
|
|
|
